Foreverun Motor Harmonic Balancer Puller Crank Pulley Puller For GM Dodge Jeep Chrysler 25264

100% quality assurance tested, more responsive, less expensive, and easier to install.<br> Save you time when safely and quickly removing the harmonic balancer and eliminate the need to remove the radiator.<br> The tool features a "clip-in" design, allowing removal without bolting the puller to the balancer.<br> It has sufficient weight and strength to ensure that it will not break during use.<br> Made of carbon steel material, the surface is sprayed with anti-oxidation and corrosion paint is corrosion-resistant and very durable.<br> Material &amp; Color:<br> Material: made of high-quality Carbon Steel.<br> Color: as the picture.<br>

• 1. The harmonic balancer puller adopts a "clamp-in" design,

• 2. which can be disassembled without connecting the puller bolts to the balancer,

• 3. which helps removing the balancer quickly and easily.

• 4. Constructed from high quality carbon steel material , it is solid, durable and no deformation .

• 5. The surface is coated with black paint, which can resist corrosion and rust, ensures long-term service.

• 6. When this harmonic balancer pullers (without threaded holes) is working on the balancer,

• 7. it do not require disassembly of the radiator.

• 8. This is a unique design of buckle attachment that can be disassembled without fixing the tie rod to the balancer.

• For GM V8 Engines: 5.3L, 5.7L LS1, 6.0 LS2, 6.2L LS3, 7.0 L

• For Chrysler / Dodge / Jeep: 3.5L, 3.7L V6, 4.7L, 5.7L, 6.1L

• For Ford Coyote 5.0 Supercharged (Pre 2018)

• (Not applicable to 1997 or earlier GM series engines)

• Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.

• 1. Constructed from high quality carbon steel material , it is solid, durable and no deformation .

• 2. The surface is coated with black paint, which can resist corrosion and rust, ensures long-term service.

• 3. Lubricate and thread the pressure screw into the puller tool.

• 4. Using a ratchet remove balancer’s retainer bolt.

• 5. Stick the adapter rod into the center of the balancer and then put the hollow end of the pressure

• 6. screw over the adapter rod.

• 7. Insert the jaws through the spoked areas so they’re gripping the center hub.

• 8. Hand tighten the pressure screw until it makes contact with the adapter rod.

• 9. Use a ratchet to turn the pressure screw until the balancer is pulled.

• 1x Harmonic Balancer Puller