Wiher Stud Finder Wall Scanner, 5 in 1 Electronic Stud Detector with Upgraded Smart Sensor, Audio Alarm and HD LCD Display for the Center and Edge of Wood, AC Wire, Metal and Studs Detection(Orange)

<p><strong>Warm Tips</strong><br>1. When using the Stud Scan Mode, if you're unsure of the detection depth, it's recommended to start with the 1/2"" scan mode. If nothing is detected in the 1/2"" scan mode, switch to the 1"" or 1 1/2"" scan mode.</p> <p>2. Before moving the beam finder for walls each time, you need to wait for the calibration to complete (3 - 5 seconds).During calibration, to avoid affecting the measurement results, the stud locator must be kept away from any metal objects, wires, and strong magnetic field sources.</p> <p>3. To get the best scan results, it's crucial to hold the product locator correctly and move it properly during scanning.<br>Follow these tips for more accurate scan results:<br>①Hold the handle on one side with your thumb and the other side with your fingers.Make sure your fingertips are on the handle and don't touch the surface being scanned or the tool's scanning head.<br>②Keep the electronic stud finder steadily parallel to the stud. Don't rotate the wall wire locator.Place the tool flat on the wall and then slide it slowly over the surface being scanned. Don't shake, tilt, or press too hard.<br>③Avoid placing your other hand or any other part of your body on the surface being scanned, as this can interfere with the tool's performance.</p> <p>4. If the scan results are unstable, it may be due to wetness or dampness inside the wall or drywall, or the recent use of coating or wallpaper that hasn't fully dried. Even if the wetness isn't visible, it can affect the tool's sensors. Let the wall dry for a few days.</p>

• 【Sensitivity Upgrade】Our stud detector features an upgraded smart micro-sensor chip, boasting a 100% boost in sensitivity! It detects wooden beams (1.5" deep), metal pipes (2.36") and warns of live wires (2" deep). Whether it's drywall or concrete, it penetrates layers, precisely pinpointing edges and centers. From hanging a picture to installing a wall cabinet, it's your "invisible safety advisor", ensuring every drill hole safe for your family. (Please Note: Not Included Batteries, Need to Prepare a 6F22 9V Battery by Yourself.)
• 【Effortless Precision】The 2.6" widened anti-slip handle, staying put even during long holds or with gloves. 2.4" high-def backlit LCD display is clear in dim basements and attics. At just 170g (lighter than a phone), it's easy to operate with one hand. During detection, the dynamic signal bar and stepped beeping guide you. The closer you get to the target, the higher the beeping frequency – you could find the right spot with your eyes closed!
• 【Construction-Grade Quality】Passed over 10,000 drop tests and crafted from high-strength ABS, this deep scan stud finder is dustproof, waterproof, and durable. It performs reliably in tough construction sites. Whether it's a gift for DIY enthusiasts who love tinkering, professional contractors, or friends who've just moved into a new home, it's an incredibly practical and thoughtful gift.
• 【5 in 1 Scanning Modes】The 5-in-1 function combines a stud finder, metal detector, voltage tester and depth gauge, costing less than 1/3 of a traditional toolset.①Stud Scan(0.5"/1"/1.5" depth): Locate wooden beam centers for a secure TV or bookshelf in small or old-house walls.②Metal Scan(2.36" depth): Find hidden pipes and rebars before kitchen or bathroom remodeling, saving big on repairs.③Wire Scan(2" depth): Detect 80-240V live wires with a signal bar and beeps, avoiding shocks.
• 【Home - Improvement Tool Essential】Whether you're hanging a TV, installing a bookshelf, building a tool rack in the garage, renovating an old house, remodeling a rental, or decorating a commercial space, it can: ① Help you find the best drill points, reducing wall - patching by 80%; ② Warn you in advance of dangerous areas, avoiding 99% of mis - drilling accidents; ③ Simplify the operation process, saving 60% of measurement time.